With it's built-in advanced algorithm and the temperature sensor, it can keep the highest discharge rate in an appropriate temperature range and the built-in heatsink effectively dissipates the heat to prevent the discharger from overheating.
The VIFLY StoreSafe lipo discharger automatically identifies 2S to 6S lipos making it simple and convenient for the user. And one of the simplest ways to store your lipos.
The StoreSafe will stop discharging when your battery reaches storage voltage and then goes into an ultra-low leakage current so the unit can be left for long time without over-discharging the battery.
Operation:
Before using StoreSafe, please make sure that the voltage of each
battery cell is higher than 3.95V. After plugging in the battery, the LED that
indicates the status will flash for about 5 seconds and then enter the
discharging state. If the LED status not indicates correctly, please disconnect
the battery immediately. The StoreSafe will stop discharging when your battery
reaches storage voltage (3.85V±0.08V / cell) and then goes into an ultra-low
leakage current (<10uA)
Specs
Working Voltage: 7.9 - 26V(2S-6S)
Discharging Power: 1W
Turn-off Current: < 10uA
Storage Voltage: 3.85V±0.08V / cell
Connector: XT30 or XT60 - Select Above
Weight: 8g
Size: 37 x 16 x 10 mm
Important:
Use responsibly. Never leave lipos that are charging or discharging alone.
We advise lipos be discharged outside and preferable in a metal container to minimise risk.
© Copyright 2023. [4]